How to Start Your Crommelins Compactor

Just bought your first Crommelins Plate Compactor? Whether you’re a homeowner tackling a landscaping job or a new tradie preparing for your first site, getting started is straightforward once you know the steps.

This step-by-step guide is designed to help you safely and efficiently start any Crommelins Plate Compactor model.

Starting Up Your Crommelins Plate Compactor

Step 1: Safety First

Before operating any machinery, safety should be your first priority. Make sure you’re wearing the correct personal protective equipment (PPE):

  • Earmuffs – To protect against loud noise.
  • Safety goggles – Essential when working around loose soil or gravel.
  • Gloves – For a better grip and to protect your hands.
  • Enclosed footwear – Steel caps or work boots reduce the risk of injury from slips, punctures or dropped items.

When moving the compactor, it’s best to have two people handle it to avoid strain or injury.

 

Step 2: Turn the Engine Switch to ‘ON’

Locate the engine switch on the unit and ensure it’s turned to the ON position.

 

Step 3: Set the Choke to ‘ON’

Move the choke lever into the ON position. This is particularly important when starting from a cold machinery.

 

Step 4: Adjust the Throttle

Find the throttle lever and move it down slightly to allow throttle. Don’t push it all the way forward—just enough to get it started.

 

Step 5: Pull the Recoil Cord

Hold the compactor firmly and pull the recoil cord to start the engine. You may need to give it a couple of tries, especially when starting for the first time.

 

Step 6: Ready to Compact

Once the engine is running smoothly, your Crommelins Plate Compactor is ready to go.

Tip: If you’re working on very dry or powdery soil, lightly spray the ground with water. This helps reduce dust and improves compaction.

Crommelins Plate Compactor Common Questions

Have more questions around your Crommelins Plate Compactor? Not to worry, we have compiled the top three questions that are commonly asked by our users.

Question 1: How fast does a Crommelins Plate Compactor move?

It depends on the model of the plate compactor. Below are the following specifications based on your compactor model.

Question 2: My compactor is starting – but it isn’t compacting. What’s wrong?

This is usually caused by an issue with the exciter box. Try the following:

  • Check that the V-belt is fitted correctly and tensioned.
  • Make sure the engine is running at full RPM.
  • Inspect if the belt is slipping between pulleys.

Question 3: My engine is not starting at all. What should I check?

Here is a checklist to run through when your engine is not starting:

  • Is the engine switch in the ON position?
  • Check the oil levels
  • Inspect the spark plug of the plate compactor if it is functional
  • Check the fuel – has it gone bad?
  • Inspect the air filter and clean it if required

If you are still encountering issues with your Crommelins Plate Compactor – not to worry – our compactor range is covered by two years warranty. Simply leave the plate compactor as is and call us at (08) 9350 5588 or find a service agent in our dealer map.